#include <pcl/surface/3rdparty/opennurbs/opennurbs_beam.h>

Inheritance diagram for ON_Extrusion:

Public Member Functions
	ON_Extrusion ()
	ON_Extrusion (const ON_Extrusion &src)
	~ON_Extrusion ()
ON_Extrusion &	operator= (const ON_Extrusion &)
ON_BOOL32	IsValid (ON_TextLog *text_log=NULL) const
void	Dump (ON_TextLog &) const
unsigned int	SizeOf () const
ON__UINT32	DataCRC (ON__UINT32 current_remainder) const
ON_BOOL32	Write (ON_BinaryArchive &binary_archive) const
ON_BOOL32	Read (ON_BinaryArchive &binary_archive)
ON::object_type	ObjectType () const
int	Dimension () const
ON_BOOL32	GetBBox (double boxmin, double boxmax, int bGrowBox=false) const
bool	GetTightBoundingBox (ON_BoundingBox &tight_bbox, int bGrowBox=false, const ON_Xform *xform=0) const
ON_BOOL32	Transform (const ON_Xform &xform)
ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
ON_Brep *	BrepForm (ON_Brep *brep, bool bSmoothFaces) const
ON_SumSurface *	SumSurfaceForm (ON_SumSurface *sum_surface) const
bool	GetBrepFormComponentIndex (ON_COMPONENT_INDEX extrusion_ci, ON_COMPONENT_INDEX &brep_ci) const
bool	GetBrepFormComponentIndex (ON_COMPONENT_INDEX extrusion_ci, double extrusion_profile_parameter, const ON_Brep &brep_form, ON_COMPONENT_INDEX &brep_ci) const
ON_BOOL32	SetDomain (int dir, double t0, double t1)
ON_Interval	Domain (int dir) const
ON_BOOL32	GetSurfaceSize (double width, double height) const
int	SpanCount (int dir) const
ON_BOOL32	GetSpanVector (int dir, double *span_vector) const
ON_BOOL32	GetSpanVectorIndex (int dir, double t, int side, int span_vector_index, ON_Interval span_interval) const
int	Degree (int dir) const
ON_BOOL32	GetParameterTolerance (int dir, double t, double tminus, double tplus) const
ISO	IsIsoparametric (const ON_Curve &curve, const ON_Interval *curve_domain=NULL) const
ON_BOOL32	IsPlanar (ON_Plane *plane=NULL, double tolerance=ON_ZERO_TOLERANCE) const
ON_BOOL32	IsClosed (int) const
ON_BOOL32	IsPeriodic (int) const
bool	GetNextDiscontinuity (int dir, ON::continuity c, double t0, double t1, double t, int hint=NULL, int *dtype=NULL, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) const
bool	IsContinuous (ON::continuity c, double s, double t, int *hint=NULL, double point_tolerance=ON_ZERO_TOLERANCE, double d1_tolerance=ON_ZERO_TOLERANCE, double d2_tolerance=ON_ZERO_TOLERANCE, double cos_angle_tolerance=ON_DEFAULT_ANGLE_TOLERANCE_COSINE, double curvature_tolerance=ON_SQRT_EPSILON) const
ISO	IsIsoparametric (const ON_BoundingBox &bbox) const
ON_BOOL32	Reverse (int dir)
ON_BOOL32	Transpose ()
ON_BOOL32	Evaluate (double u, double v, int num_der, int array_stride, double der_array, int quadrant=0, int hint=0) const
ON_Curve *	IsoCurve (int dir, double c) const
ON_BOOL32	Trim (int dir, const ON_Interval &domain)
bool	Extend (int dir, const ON_Interval &domain)
ON_BOOL32	Split (int dir, double c, ON_Surface &west_or_south_side, ON_Surface &east_or_north_side) const
bool	GetClosestPoint (const ON_3dPoint &P, double s, double t, double maximum_distance=0.0, const ON_Interval sdomain=0, const ON_Interval tdomain=0) const
ON_BOOL32	GetLocalClosestPoint (const ON_3dPoint &, double, double, double , double , const ON_Interval =NULL, const ON_Interval =NULL) const
int	GetNurbForm (ON_NurbsSurface &nurbs_surface, double tolerance=0.0) const
int	HasNurbForm () const
bool	GetSurfaceParameterFromNurbFormParameter (double nurbs_s, double nurbs_t, double surface_s, double surface_t) const
bool	GetNurbFormParameterFromSurfaceParameter (double surface_s, double surface_t, double nurbs_s, double nurbs_t) const
void	Destroy ()
bool	SetPath (ON_3dPoint A, ON_3dPoint B)
bool	SetPathAndUp (ON_3dPoint A, ON_3dPoint B, ON_3dVector up)
int	PathParameter () const
ON_3dPoint	PathStart () const
ON_3dPoint	PathEnd () const
ON_3dVector	PathTangent () const
bool	SetMiterPlaneNormal (ON_3dVector N, int end)
void	GetMiterPlaneNormal (int end, ON_3dVector &N) const
int	IsMitered () const
bool	IsSolid () const
int	IsCapped () const
int	CapCount () const
ON_DEPRECATED int	FaceCount () const
bool	GetProfileTransformation (double s, ON_Xform &xform) const
bool	GetProfilePlane (double s, ON_Plane &plane) const
bool	GetPathPlane (double s, ON_Plane &plane) const
bool	SetOuterProfile (ON_Curve *outer_profile, bool bCap)
bool	AddInnerProfile (ON_Curve *inner_profile)
int	ProfileCount () const
int	ProfileSmoothSegmentCount (int profile_index) const
int	ProfileParameter () const
const ON_Curve *	Profile (int profile_index) const
ON_Curve *	Profile3d (int profile_index, double s) const
ON_Curve *	Profile3d (ON_COMPONENT_INDEX ci) const
ON_Curve *	WallEdge (ON_COMPONENT_INDEX ci) const
ON_Surface *	WallSurface (ON_COMPONENT_INDEX ci) const
ON_LineCurve *	PathLineCurve (ON_LineCurve *line_curve) const
int	ProfileIndex (double profile_parameter) const
const ON_PolyCurve *	PolyProfile () const
int	GetProfileCurves (ON_SimpleArray< const ON_Curve * > &profile_curves) const
int	GetProfileKinkParameters (int profile_index, ON_SimpleArray< double > &profile_kink_parameters) const
bool	ProfileIsKinked (int profile_index) const
Public Member Functions inherited from ON_Surface
void	DestroyRuntimeCache (bool bDelete=true)
	ON_Surface ()
	ON_Surface (const ON_Surface &)
ON_Surface &	operator= (const ON_Surface &)
virtual	~ON_Surface ()
unsigned int	SizeOf () const
bool	EvaluatePoint (const class ON_ObjRef &objref, ON_3dPoint &P) const
virtual ON_Surface *	DuplicateSurface () const
ON::object_type	ObjectType () const
ON_BOOL32	HasBrepForm () const
ON_Brep *	BrepForm (ON_Brep *brep=NULL) const
ON_BOOL32	GetDomain (int dir, double t0, double t1) const
bool	SetDomain (int dir, ON_Interval domain)
bool	IsSphere (ON_Sphere *sphere=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsCylinder (ON_Cylinder *cylinder=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsCone (ON_Cone *cone=NULL, double tolerance=ON_ZERO_TOLERANCE) const
bool	IsTorus (ON_Torus *torus=NULL, double tolerance=ON_ZERO_TOLERANCE) const
virtual ON_BOOL32	IsSingular (int) const
bool	IsSolid () const
bool	IsAtSingularity (double s, double t, bool bExact=true) const
int	IsAtSeam (double s, double t) const
ON_3dPoint	PointAt (double, double) const
ON_3dVector	NormalAt (double, double) const
ON_BOOL32	FrameAt (double u, double v, ON_Plane &frame) const
ON_BOOL32	EvPoint (double u, double v, ON_3dPoint &point, int quadrant=0, int *hint=0) const
ON_BOOL32	Ev1Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, int quadrant=0, int *hint=0) const
ON_BOOL32	Ev2Der (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &duu, ON_3dVector &duv, ON_3dVector &dvv, int quadrant=0, int *hint=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &normal, int quadrant=0, int *hint=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dVector &normal, int quadrant=0, int *hint=0) const
ON_BOOL32	EvNormal (double u, double v, ON_3dPoint &point, ON_3dVector &du, ON_3dVector &dv, ON_3dVector &normal, int=0, int *=0) const
ON_NurbsSurface *	NurbsSurface (ON_NurbsSurface pNurbsSurface=NULL, double tolerance=0.0, const ON_Interval s_subdomain=NULL, const ON_Interval *t_subdomain=NULL) const
void	DestroySurfaceTree ()
Public Member Functions inherited from ON_Geometry
	ON_Geometry ()
	ON_Geometry (const ON_Geometry &)
ON_Geometry &	operator= (const ON_Geometry &)
virtual	~ON_Geometry ()
ON_BoundingBox	BoundingBox () const
ON_BOOL32	GetBoundingBox (ON_BoundingBox &bbox, int bGrowBox=false) const
ON_BOOL32	GetBoundingBox (ON_3dPoint &bbox_min, ON_3dPoint &bbox_max, int bGrowBox=false) const
ON_BOOL32	Rotate (double sin_angle, double cos_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Rotate (double rotation_angle, const ON_3dVector &rotation_axis, const ON_3dPoint &rotation_center)
ON_BOOL32	Translate (const ON_3dVector &translation_vector)
ON_BOOL32	Scale (double scale_factor)
virtual void	ClearBoundingBox ()
virtual bool	IsDeformable () const
virtual bool	MakeDeformable ()
virtual ON_BOOL32	SwapCoordinates (int i, int j)
virtual ON_COMPONENT_INDEX	ComponentIndex () const
Public Member Functions inherited from ON_Object
bool	CopyFrom (const ON_Object *src)
	ON_Object ()
	ON_Object (const ON_Object &)
ON_Object &	operator= (const ON_Object &)
virtual	~ON_Object ()
void	EmergencyDestroy ()
virtual void	MemoryRelocate ()
ON_BOOL32	IsKindOf (const ON_ClassId *pClassId) const
virtual ON_UUID	ModelObjectId () const
bool	SetUserString (const wchar_t key, const wchar_t string_value)
int	SetUserStrings (int count, const ON_UserString *user_strings, bool bReplace)
bool	GetUserString (const wchar_t *key, ON_wString &string_value) const
int	GetUserStrings (ON_ClassArray< ON_UserString > &user_strings) const
int	GetUserStringKeys (ON_ClassArray< ON_wString > &user_string_keys) const
int	UserStringCount () const
ON_BOOL32	AttachUserData (ON_UserData *pUserData)
ON_BOOL32	DetachUserData (ON_UserData *pUserData)
ON_UserData *	GetUserData (const ON_UUID &userdata_uuid) const
void	PurgeUserData ()
ON_UserData *	FirstUserData () const
void	TransformUserData (const ON_Xform &xform)
void	CopyUserData (const ON_Object &source_object)
void	MoveUserData (ON_Object &source_object)

Static Public Member Functions
static bool	IsValidPolyCurveProfile (const ON_PolyCurve &polycurve, ON_TextLog *text_log=0)
static bool	CleanupPolyCurveProfile (ON_PolyCurve &polycurve)
static ON_Extrusion *	Cylinder (const ON_Cylinder &cylinder, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)
static ON_Extrusion *	Pipe (const ON_Cylinder &cylinder, double other_radius, bool bCapBottom, bool bCapTop, ON_Extrusion *extrusion=0)
static ON_Extrusion *	CreateFrom3dCurve (const ON_Curve &curve, const ON_Plane plane, double height, bool bCap, ON_Extrusion extrusion=0)

Public Attributes
ON_Line	m_path
ON_Interval	m_t
ON_3dVector	m_up
int	m_profile_count
ON_Curve *	m_profile
bool	m_bCap [2]
bool	m_bHaveN [2]
ON_3dVector	m_N [2]
ON_Interval	m_path_domain
bool	m_bTransposed

Static Public Attributes
static const double	m_Nz_min
static const double	m_path_length_min

Additional Inherited Members
Public Types inherited from ON_Surface
enum	ISO { not_iso = 0 , x_iso = 1 , y_iso = 2 , W_iso = 3 , S_iso = 4 , E_iso = 5 , N_iso = 6 , iso_count = 7 }

Detailed Description

Definition at line 36 of file opennurbs_beam.h.

Constructor & Destructor Documentation

◆ ON_Extrusion() [1/2]

ON_Extrusion::ON_Extrusion ( )

Referenced by CreateFrom3dCurve(), Cylinder(), ON_Extrusion(), operator=(), and Pipe().

◆ ON_Extrusion() [2/2]

ON_Extrusion::ON_Extrusion ( const ON_Extrusion & src )

References ON_Extrusion().

◆ ~ON_Extrusion()

ON_Extrusion::~ON_Extrusion ( )

Member Function Documentation

◆ AddInnerProfile()

bool ON_Extrusion::AddInnerProfile ( ON_Curve * inner_profile )

◆ BrepForm() [1/2]

ON_Brep * ON_Extrusion::BrepForm	(	ON_Brep *	brep,
		bool	bSmoothFaces ) const

◆ BrepForm() [2/2]

ON_Brep * ON_Extrusion::BrepForm ( ON_Brep * brep = NULL ) const

virtual

Reimplemented from ON_Geometry.

◆ CapCount()

int ON_Extrusion::CapCount ( ) const

◆ CleanupPolyCurveProfile()

bool ON_Extrusion::CleanupPolyCurveProfile ( ON_PolyCurve & polycurve )

static

◆ CreateFrom3dCurve()

ON_Extrusion * ON_Extrusion::CreateFrom3dCurve	(	const ON_Curve &	curve,
		const ON_Plane *	plane,
		double	height,
		bool	bCap,
		ON_Extrusion *	extrusion = 0 )

static

References ON_Extrusion().

◆ Cylinder()

ON_Extrusion * ON_Extrusion::Cylinder	(	const ON_Cylinder &	cylinder,
		bool	bCapBottom,
		bool	bCapTop,
		ON_Extrusion *	extrusion = 0 )

static

References ON_Extrusion().

◆ DataCRC()

ON__UINT32 ON_Extrusion::DataCRC ( ON__UINT32 current_remainder ) const

virtual

Reimplemented from ON_Object.

◆ Degree()

int ON_Extrusion::Degree ( int dir ) const

virtual

Implements ON_Surface.

◆ Destroy()

void ON_Extrusion::Destroy ( )

◆ Dimension()

int ON_Extrusion::Dimension ( ) const

virtual

Implements ON_Geometry.

◆ Domain()

ON_Interval ON_Extrusion::Domain ( int dir ) const

virtual

Implements ON_Surface.

◆ Dump()

void ON_Extrusion::Dump ( ON_TextLog & ) const

virtual

Reimplemented from ON_Object.

◆ Evaluate()

ON_BOOL32 ON_Extrusion::Evaluate	(	double	u,
		double	v,
		int	num_der,
		int	array_stride,
		double *	der_array,
		int	quadrant = 0,
		int *	hint = 0 ) const

virtual

Implements ON_Surface.

◆ Extend()

bool ON_Extrusion::Extend	(	int	dir,
		const ON_Interval &	domain )

virtual

Reimplemented from ON_Surface.

◆ FaceCount()

ON_DEPRECATED int ON_Extrusion::FaceCount ( ) const

◆ GetBBox()

ON_BOOL32 ON_Extrusion::GetBBox	(	double *	boxmin,
		double *	boxmax,
		int	bGrowBox = false ) const

virtual

Implements ON_Geometry.

◆ GetBrepFormComponentIndex() [1/2]

bool ON_Extrusion::GetBrepFormComponentIndex	(	ON_COMPONENT_INDEX	extrusion_ci,
		double	extrusion_profile_parameter,
		const ON_Brep &	brep_form,
		ON_COMPONENT_INDEX &	brep_ci ) const

◆ GetBrepFormComponentIndex() [2/2]

bool ON_Extrusion::GetBrepFormComponentIndex	(	ON_COMPONENT_INDEX	extrusion_ci,
		ON_COMPONENT_INDEX &	brep_ci ) const

◆ GetClosestPoint()

bool ON_Extrusion::GetClosestPoint	(	const ON_3dPoint &	P,
		double *	s,
		double *	t,
		double	maximum_distance = 0.0,
		const ON_Interval *	sdomain = 0,
		const ON_Interval *	tdomain = 0 ) const

◆ GetLocalClosestPoint()

ON_BOOL32 ON_Extrusion::GetLocalClosestPoint	(	const ON_3dPoint &	,
		double	,
		double	,
		double *	,
		double *	,
		const ON_Interval *	= NULL,
		const ON_Interval *	= NULL ) const

◆ GetMiterPlaneNormal()

void ON_Extrusion::GetMiterPlaneNormal	(	int	end,
		ON_3dVector &	N ) const

◆ GetNextDiscontinuity()

bool ON_Extrusion::GetNextDiscontinuity	(	int	dir,
		ON::continuity	c,
		double	t0,
		double	t1,
		double *	t,
		int *	hint = NULL,
		int *	dtype = NULL,
		double	cos_angle_tolerance = ON_DEFAULT_ANGLE_TOLERANCE_COSINE,
		double	curvature_tolerance = ON_SQRT_EPSILON ) const

virtual

Reimplemented from ON_Surface.

◆ GetNurbForm()

int ON_Extrusion::GetNurbForm	(	ON_NurbsSurface &	nurbs_surface,
		double	tolerance = 0.0 ) const

virtual

Reimplemented from ON_Surface.

◆ GetNurbFormParameterFromSurfaceParameter()

bool ON_Extrusion::GetNurbFormParameterFromSurfaceParameter	(	double	surface_s,
		double	surface_t,
		double *	nurbs_s,
		double *	nurbs_t ) const

virtual

Reimplemented from ON_Surface.

◆ GetParameterTolerance()

ON_BOOL32 ON_Extrusion::GetParameterTolerance	(	int	dir,
		double	t,
		double *	tminus,
		double *	tplus ) const

virtual

Reimplemented from ON_Surface.

◆ GetPathPlane()

bool ON_Extrusion::GetPathPlane	(	double	s,
		ON_Plane &	plane ) const

◆ GetProfileCurves()

int ON_Extrusion::GetProfileCurves ( ON_SimpleArray< const ON_Curve * > & profile_curves ) const

◆ GetProfileKinkParameters()

int ON_Extrusion::GetProfileKinkParameters	(	int	profile_index,
		ON_SimpleArray< double > &	profile_kink_parameters ) const

◆ GetProfilePlane()

bool ON_Extrusion::GetProfilePlane	(	double	s,
		ON_Plane &	plane ) const

◆ GetProfileTransformation()

bool ON_Extrusion::GetProfileTransformation	(	double	s,
		ON_Xform &	xform ) const

◆ GetSpanVector()

ON_BOOL32 ON_Extrusion::GetSpanVector	(	int	dir,
		double *	span_vector ) const

virtual

Implements ON_Surface.

◆ GetSpanVectorIndex()

ON_BOOL32 ON_Extrusion::GetSpanVectorIndex	(	int	dir,
		double	t,
		int	side,
		int *	span_vector_index,
		ON_Interval *	span_interval ) const

virtual

Reimplemented from ON_Surface.

◆ GetSurfaceParameterFromNurbFormParameter()

bool ON_Extrusion::GetSurfaceParameterFromNurbFormParameter	(	double	nurbs_s,
		double	nurbs_t,
		double *	surface_s,
		double *	surface_t ) const

virtual

Reimplemented from ON_Surface.

◆ GetSurfaceSize()

ON_BOOL32 ON_Extrusion::GetSurfaceSize	(	double *	width,
		double *	height ) const

virtual

Reimplemented from ON_Surface.

◆ GetTightBoundingBox()

bool ON_Extrusion::GetTightBoundingBox	(	ON_BoundingBox &	tight_bbox,
		int	bGrowBox = false,
		const ON_Xform *	xform = 0 ) const

virtual

Reimplemented from ON_Geometry.

◆ HasNurbForm()

int ON_Extrusion::HasNurbForm ( ) const

virtual

Reimplemented from ON_Surface.

◆ IsCapped()

int ON_Extrusion::IsCapped ( ) const

◆ IsClosed()

ON_BOOL32 ON_Extrusion::IsClosed ( int ) const

virtual

Reimplemented from ON_Surface.

◆ IsContinuous()

bool ON_Extrusion::IsContinuous	(	ON::continuity	c,
		double	s,
		double	t,
		int *	hint = NULL,
		double	point_tolerance = ON_ZERO_TOLERANCE,
		double	d1_tolerance = ON_ZERO_TOLERANCE,
		double	d2_tolerance = ON_ZERO_TOLERANCE,
		double	cos_angle_tolerance = ON_DEFAULT_ANGLE_TOLERANCE_COSINE,
		double	curvature_tolerance = ON_SQRT_EPSILON ) const

virtual

Reimplemented from ON_Surface.

◆ IsIsoparametric() [1/2]

ISO ON_Extrusion::IsIsoparametric ( const ON_BoundingBox & bbox ) const

virtual

Reimplemented from ON_Surface.

◆ IsIsoparametric() [2/2]

ISO ON_Extrusion::IsIsoparametric	(	const ON_Curve &	curve,
		const ON_Interval *	curve_domain = NULL ) const

virtual

Reimplemented from ON_Surface.

◆ IsMitered()

int ON_Extrusion::IsMitered ( ) const

◆ IsoCurve()

ON_Curve * ON_Extrusion::IsoCurve	(	int	dir,
		double	c ) const

virtual

Reimplemented from ON_Surface.

◆ IsPeriodic()

ON_BOOL32 ON_Extrusion::IsPeriodic ( int ) const

virtual

Reimplemented from ON_Surface.

◆ IsPlanar()

ON_BOOL32 ON_Extrusion::IsPlanar	(	ON_Plane *	plane = NULL,
		double	tolerance = ON_ZERO_TOLERANCE ) const

virtual

Reimplemented from ON_Surface.

◆ IsSolid()

bool ON_Extrusion::IsSolid ( ) const

◆ IsValid()

ON_BOOL32 ON_Extrusion::IsValid ( ON_TextLog * text_log = NULL ) const

virtual

Implements ON_Object.

◆ IsValidPolyCurveProfile()

bool ON_Extrusion::IsValidPolyCurveProfile	(	const ON_PolyCurve &	polycurve,
		ON_TextLog *	text_log = 0 )

static

◆ ObjectType()

ON::object_type ON_Extrusion::ObjectType ( ) const

virtual

Reimplemented from ON_Object.

◆ operator=()

ON_Extrusion & ON_Extrusion::operator= ( const ON_Extrusion & )

References ON_Extrusion().

◆ PathEnd()

ON_3dPoint ON_Extrusion::PathEnd ( ) const

◆ PathLineCurve()

ON_LineCurve * ON_Extrusion::PathLineCurve ( ON_LineCurve * line_curve ) const

◆ PathParameter()

int ON_Extrusion::PathParameter ( ) const

◆ PathStart()

ON_3dPoint ON_Extrusion::PathStart ( ) const

◆ PathTangent()

ON_3dVector ON_Extrusion::PathTangent ( ) const

◆ Pipe()

ON_Extrusion * ON_Extrusion::Pipe	(	const ON_Cylinder &	cylinder,
		double	other_radius,
		bool	bCapBottom,
		bool	bCapTop,
		ON_Extrusion *	extrusion = 0 )

static

References ON_Extrusion().

◆ PolyProfile()

const ON_PolyCurve * ON_Extrusion::PolyProfile ( ) const

◆ Profile()

const ON_Curve * ON_Extrusion::Profile ( int profile_index ) const

◆ Profile3d() [1/2]

ON_Curve * ON_Extrusion::Profile3d	(	int	profile_index,
		double	s ) const

◆ Profile3d() [2/2]

ON_Curve * ON_Extrusion::Profile3d ( ON_COMPONENT_INDEX ci ) const

◆ ProfileCount()

int ON_Extrusion::ProfileCount ( ) const

◆ ProfileIndex()

int ON_Extrusion::ProfileIndex ( double profile_parameter ) const

◆ ProfileIsKinked()

bool ON_Extrusion::ProfileIsKinked ( int profile_index ) const

◆ ProfileParameter()

int ON_Extrusion::ProfileParameter ( ) const

◆ ProfileSmoothSegmentCount()

int ON_Extrusion::ProfileSmoothSegmentCount ( int profile_index ) const

◆ Read()

ON_BOOL32 ON_Extrusion::Read ( ON_BinaryArchive & binary_archive )

virtual

Reimplemented from ON_Object.

◆ Reverse()

ON_BOOL32 ON_Extrusion::Reverse ( int dir )

virtual

Implements ON_Surface.

◆ SetDomain()

ON_BOOL32 ON_Extrusion::SetDomain	(	int	dir,
		double	t0,
		double	t1 )

virtual

Reimplemented from ON_Surface.

◆ SetMiterPlaneNormal()

bool ON_Extrusion::SetMiterPlaneNormal	(	ON_3dVector	N,
		int	end )

◆ SetOuterProfile()

bool ON_Extrusion::SetOuterProfile	(	ON_Curve *	outer_profile,
		bool	bCap )

◆ SetPath()

bool ON_Extrusion::SetPath	(	ON_3dPoint	A,
		ON_3dPoint	B )

◆ SetPathAndUp()

bool ON_Extrusion::SetPathAndUp	(	ON_3dPoint	A,
		ON_3dPoint	B,
		ON_3dVector	up )

◆ SizeOf()

unsigned int ON_Extrusion::SizeOf ( ) const

virtual

Reimplemented from ON_Object.

◆ SpanCount()

int ON_Extrusion::SpanCount ( int dir ) const

virtual

Implements ON_Surface.

◆ Split()

ON_BOOL32 ON_Extrusion::Split	(	int	dir,
		double	c,
		ON_Surface *&	west_or_south_side,
		ON_Surface *&	east_or_north_side ) const

virtual

Reimplemented from ON_Surface.

References ON_Surface::ON_Surface().

◆ SumSurfaceForm()

ON_SumSurface * ON_Extrusion::SumSurfaceForm ( ON_SumSurface * sum_surface ) const

◆ Transform()

ON_BOOL32 ON_Extrusion::Transform ( const ON_Xform & xform )

virtual

Reimplemented from ON_Geometry.

◆ Transpose()

ON_BOOL32 ON_Extrusion::Transpose ( )

virtual

Implements ON_Surface.

◆ Trim()

ON_BOOL32 ON_Extrusion::Trim	(	int	dir,
		const ON_Interval &	domain )

virtual

Reimplemented from ON_Surface.

◆ WallEdge()

ON_Curve * ON_Extrusion::WallEdge ( ON_COMPONENT_INDEX ci ) const

◆ WallSurface()

ON_Surface * ON_Extrusion::WallSurface ( ON_COMPONENT_INDEX ci ) const

References ON_Surface::ON_Surface().

◆ Write()

ON_BOOL32 ON_Extrusion::Write ( ON_BinaryArchive & binary_archive ) const

virtual

Reimplemented from ON_Object.

Member Data Documentation

◆ m_bCap

bool ON_Extrusion::m_bCap[2]

Definition at line 768 of file opennurbs_beam.h.

◆ m_bHaveN

bool ON_Extrusion::m_bHaveN[2]

Definition at line 778 of file opennurbs_beam.h.

◆ m_bTransposed

bool ON_Extrusion::m_bTransposed

Definition at line 783 of file opennurbs_beam.h.

◆ m_N

ON_3dVector ON_Extrusion::m_N[2]

Definition at line 779 of file opennurbs_beam.h.

◆ m_Nz_min

const double ON_Extrusion::m_Nz_min

static

Definition at line 787 of file opennurbs_beam.h.

◆ m_path

ON_Line ON_Extrusion::m_path

Definition at line 741 of file opennurbs_beam.h.

◆ m_path_domain

ON_Interval ON_Extrusion::m_path_domain

Definition at line 782 of file opennurbs_beam.h.

◆ m_path_length_min

const double ON_Extrusion::m_path_length_min

static

Definition at line 791 of file opennurbs_beam.h.

◆ m_profile

ON_Curve* ON_Extrusion::m_profile

Definition at line 763 of file opennurbs_beam.h.

◆ m_profile_count

int ON_Extrusion::m_profile_count

Definition at line 762 of file opennurbs_beam.h.

◆ m_t

ON_Interval ON_Extrusion::m_t

Definition at line 742 of file opennurbs_beam.h.

◆ m_up

ON_3dVector ON_Extrusion::m_up

Definition at line 743 of file opennurbs_beam.h.

The documentation for this class was generated from the following file:

pcl/surface/3rdparty/opennurbs/opennurbs_beam.h

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ON_Extrusion() [1/2]

◆ ON_Extrusion() [2/2]

◆ ~ON_Extrusion()

Member Function Documentation

◆ AddInnerProfile()

◆ BrepForm() [1/2]

◆ BrepForm() [2/2]

◆ CapCount()

◆ CleanupPolyCurveProfile()

◆ CreateFrom3dCurve()

◆ Cylinder()

◆ DataCRC()

◆ Degree()

◆ Destroy()

◆ Dimension()

◆ Domain()

◆ Dump()

◆ Evaluate()

◆ Extend()

◆ FaceCount()

◆ GetBBox()

◆ GetBrepFormComponentIndex() [1/2]

◆ GetBrepFormComponentIndex() [2/2]

◆ GetClosestPoint()

◆ GetLocalClosestPoint()

◆ GetMiterPlaneNormal()

◆ GetNextDiscontinuity()

◆ GetNurbForm()

◆ GetNurbFormParameterFromSurfaceParameter()

◆ GetParameterTolerance()

◆ GetPathPlane()

◆ GetProfileCurves()

◆ GetProfileKinkParameters()

◆ GetProfilePlane()

◆ GetProfileTransformation()

◆ GetSpanVector()

◆ GetSpanVectorIndex()

◆ GetSurfaceParameterFromNurbFormParameter()

◆ GetSurfaceSize()

◆ GetTightBoundingBox()

◆ HasNurbForm()

◆ IsCapped()

◆ IsClosed()

◆ IsContinuous()

◆ IsIsoparametric() [1/2]

◆ IsIsoparametric() [2/2]

◆ IsMitered()

◆ IsoCurve()

◆ IsPeriodic()

◆ IsPlanar()

◆ IsSolid()

◆ IsValid()

◆ IsValidPolyCurveProfile()

◆ ObjectType()

◆ operator=()

◆ PathEnd()

◆ PathLineCurve()

◆ PathParameter()

◆ PathStart()

◆ PathTangent()

◆ Pipe()

◆ PolyProfile()

◆ Profile()

◆ Profile3d() [1/2]

◆ Profile3d() [2/2]

◆ ProfileCount()

◆ ProfileIndex()

◆ ProfileIsKinked()

◆ ProfileParameter()

◆ ProfileSmoothSegmentCount()

◆ Read()

◆ Reverse()

◆ SetDomain()